How-to: properly tape a flashed Radeon 9200

Before you can use your newly flashed 9200 in your Cube, you will need to tape (scotch tape will suffice) the 3rd and 11th pins from the right (counting from the right on the BACK of the card with the AGP connectors pointing downward)

A guide to flashing the 9200, if you missed it previously, can be found here: http://www.cubeowner.com/forums/index.php?showtopic=8806

A well illustrated guide on how to tape the pins is attached to this article, courtesy of Strangedogs.

Link: